瓦面热变形对多瓦可倾瓦径向滑动轴承弹流润滑的影响
- 文件大小:292.54KB
- 浏览次数:
- 发布时间:2014-03-13
文件介绍:
本资料包含pdf文件1个,下载需要1积分
A thermal distortion model for multi-tilting-pad journal bearing was established, and the differences of lubrication performances of the multi-tilting-pad journal bearings were comparatively analyzed based on the thermal elastohydrodynamic lubrication (TEHD) model with only considering the elastic deformation and with considering the elastic deforma- tion and the thermal distortion of pad face simultaneously. The influences of thermal distortion of pad face on lubrication state were analyzed. The numerical results indicate that the thermal distortion of pad face results in the increase of minimum film thickness and the decrease of pad face temperature, however a little change of the hydrodynamic pressure. The calculated results based on TEHD model with considering the thermal distortion of pad face was compared with the experimental data, the effectiveness of this calculation method was confirmed.建立多瓦可倾瓦径向滑动轴承热变形分析的数学模型,对比分析仅考虑弹性变形和同时计入弹性变形和热变形情况下多瓦可倾瓦径向滑动轴承的弹流润滑性能差异,分析轴瓦热变形对轴承弹流润滑性能的影响。结果表明,轴瓦热变形导致最小油膜厚度增大、最高瓦面温度下降,但对流体动压力的影响较小。将计入热变形的弹流模型计算结果与实验结果进行比较,基本验证了程序包的正确性。
文件列表
正在加载...请等待或刷新页面...
发表评论
更多..相关推荐
更多..最近更新
- 1防坠落施工组织设计方案
- 2SN/T 4087-2014 狂犬病检疫技术规范
- 3DB13/T 1481-2011 车用甲醇汽油组分油
- 4某文化广场绿化种植设计cad图纸
- 5NB/T 20101-2012 压水堆核电厂反应堆弹棒事故分析要求
- 62011年监理工程师考试建设工程投资控制精讲-权威机构最新资料
- 7平地机装配
- 8通风机风压计算表
- 9GB 1886.34-2015 食品安全国家标准 食品添加剂 辣椒红
- 10SN/T 3888-2014 入出境动物皮张携带鼠疫耶尔森氏菌快速检测方法
- 11链轮联轴器SolidWorks设计
- 12某某成品油罐内外壁防腐施工方案
- 13DB12/046.73-2008 白酒单位产量综合能耗计算方法及限额
- 14中石化安全制度选编(2009)
- 15机械设计(第八版)课后习题答案