磁流体润滑机床主轴滑动轴承弹流润滑分析
- 文件大小:269.86KB
- 浏览次数:
- 发布时间:2014-03-17
本资料包含pdf文件1个,下载需要1积分
The elastohydrodynamic lubrication model of ferrofluid lubricated lathe spindle sliding bearing was estab- lished. The numerical simulation of ferrofluid elastohydrodynamic lubrication on the bearing was carried out. The effects of load and speed on the pressure and film thickness were discussed. The results show that the pressure peak is increased greatly with the increase of load ,but the pressure,film thickness and minimum film thickness at inlet region are decreased with the increase of load as the speed is constant under the condition of ferrofluid lubrication. As the load is constant, the speed has very little effect on the pressure, but the film thickness and minimum film thickness are increased greatly with the increase of speed.建立磁流体润滑机床主轴滑动轴承的弹流润滑模型,并进行弹流润滑数值模拟分析。探讨载荷和速度对磁流体润滑膜压力和膜厚的影响。分析结果表明:在磁流体润滑条件下,当转速不变时,压力峰值随着载荷的增大而增大,人口区压力、膜厚及最小膜厚随载荷的增大而减小;当载荷不变时,压力随着速度的增加没有明显变化,膜厚及最小膜厚都随速度增大而增加。
- 1水箱间消防报警及联动平面图(A栋)
- 2GB/T 17517-1998 胶粘剂压缩剪切强度试验方法 木材与木材
- 3JB/T 9430-2014 36mm×24mm幻灯放映画面检验版
- 4钢筋拉伸冷湾试验计算(新已修正)
- 5主电机处水冷装置(右)
- 6挤出机SJ-30装配图
- 7三级齿轮减速器
- 8C06-069配德州恒沃外形图
- 9大跨度钢管混凝土拱桥拱肋吊装过程线形调整方案
- 10六斗柜生产设计CAD图纸(版本二)
- 11河北省建筑业优秀企业管理者表彰管理办法
- 12JC/T 2365-2016 人造石荒料成型机
- 13JIS B6222-1998 卧式镗床 准确度的测试
- 14浙江省城市道路、桥梁、给排水统一配套用表(3)
- 15展开式二级圆柱直齿轮减速器课程设计 PDF扫描