基于AutoLISP的金属波纹管设计研究
- 文件大小:1.06MB
- 浏览次数:
- 发布时间:2014-11-21
本资料包含pdf文件1个,下载需要1积分
利用AutoLISP语言在AutoCAD环境下对三种S型焊接金属波纹管设计进行了二次开发。首先确立金属波纹管的设计规则,然后根据相关变量(初始圆、内径以及外径、波距、壁厚、长直线距离以及短直线距离组成),并利用DCL文件对话框与程序相连接完成整个波纹管的设计过程,使得初学者只需输入金属波纹管的相关参数就可以在短时间内高效地设计出理想的金属波纹管。
A design program for diaphragm of three kinds of welded metal bellows is developed in this thesis. Firstly, Ihe principle of design metal bellows is confirmed and then the bellows is developed with an automatic design system according the parametric variables. The design program is written by using AutoL1SP language on the AutoCAD system. If a user inputs design variables, such as initial radius, inner and outer diameters, pitch, thickness of plate and land length, the diaphragm is automatically designed. Users can also seleet the type of bellows efficiently.
金属波纹管,AutoLISP,AutoCAD,metal bellows,AutoLISP,AutoCAD。
基于AutoLISP的金属波纹管设计研究。
- 1中原地产广州大学城DS1604、1703居住用地前景分析
- 2CB 20091-2012 铝合金-铝-钢(不锈钢)复合过渡接头规范
- 3GB 9130-1988 钢制管法兰连接用金属环垫技术条件
- 4圆柱体运输包装尺寸系列GB/T 13201-1997
- 5JJG (核工) 1-1991 含氢正比计数管(工作级)检定规程
- 6DB51/T 648-2007 自走式农业机械行驶证证件
- 7中国新兴建总一公司国家精品工程(鲁班奖)工艺做法集锦
- 8城市生活垃圾卫生填埋技术规范
- 9小区住宅楼工程临水工程施工方案
- 10JB/T 13348-2017 滚动轴承 电梯曳引机用轴承
- 11建筑工程施工质量验收标准表格
- 12DB46/T 125-2008 热带地区瘦肉型生长育肥猪饲养标准
- 13HJ 969-2018 核动力厂运行前辐射环境本底调查技术规范
- 14DB12/T 906-2019 汽车污染物排放维护治理站建设条件
- 15GBT1231-2006高强螺栓