双头螺柱断裂分析
- 文件大小:682.37KB
- 浏览次数:
- 发布时间:2014-08-09
文件介绍:
本资料包含pdf文件1个,下载需要1积分
风力发电机齿轮箱使用M30×280双头螺柱固定.安装过程中,常常在扭力还没有达到额定扭矩时便发生螺杆部分断裂.采用宏观断口观察、化学成分分析、扫描电镜断口观察和显微组织检验等方法,对断裂的双头螺柱进行了分析.结果表明:双头螺柱断裂的原因是由于螺柱原材料中存在横向裂纹,在安装过程中裂纹在拉应力的作用下扩展,以致发生断裂.
The gearbox of wind generator is fixed by M30 x 280 studs. During the fixing procedure ,its screw is cracked when the mounting torque dese not come up to the rated torque.The Macroscopic analysis, chemical composition analysis, SEM observation and metallographic examination are used to analyze the fractured stud bolt. The results indicate that its fracture is caused by the ex- tension of the pre-existing horizontal crack when the bolt is under a tensile stress during the fixing procedure.
裂纹,风电齿轮箱,双头螺柱,crack,wind power gearbox,stud bolt。
双头螺柱断裂分析。
文件列表
正在加载...请等待或刷新页面...
发表评论
更多..相关推荐
更多..最近更新
- 1新疆伊钢锅炉房烟囱工程施工方案
- 2安-71,An-71Madcap野女郎预警机3D图纸三维模型SolidWorks设计
- 3河南08装修装饰工程定额
- 4弱电技术标施工组织
- 5南方国际广场营销策划报告
- 6汽车轮盖SolidWorks设计
- 7烧结空心砖和空心砌块 GB13545-2003
- 8GB/T 25088-2010 道路车辆 索引车和挂车之间的电连接器24V 7芯辅助型(24S)
- 9qiaohsj
- 10上海市某五星级商务酒店消防设计施工图
- 11那曲物流中心
- 12沥青路面面层施工方案
- 13工程建设项目管理第一次案例分析
- 14MT 168-1987 煤矿井下工人滑囊炎诊断标准
- 15黑龙江金湾水电站引水洞及电站工程监理规划