二维解耦微位移工作台的设计和有限元分析
- 文件大小:1.04MB
- 浏览次数:
- 发布时间:2014-11-07
本资料包含pdf文件1个,下载需要1积分
文中设计了一驱动器固定的二维解耦微位移工作台。根据所选微位移驱动器和微位移工作台空载达到最大位移时所需的驱动力,得到微位移工作台的理论设计刚度值,据此对微位移工作台进行设计,然后对其进行有限元计算,求得微位移工作台刚度的有限元计算值,刚度的理论值和有限元计算值吻合得很好,并且很好地解决了运动耦合问题,定位精度高。
A new two-dimension decoupling micro-displacement worktable driven by a fixed actuator is designed. According to the selected Micro-displacement actuator and the driving force of the micro-displacement worklable required when the no-load reach to the maximum displacement of the micro-displacement worktable, theoretical designed stiffness values is obtained. A micro-displacement working table is designed. Finite element calculated value of the micro-displacement worktable stiffness is got by finite element calculation of the micro-displacement working table. The stiffness of the theoretical and finite element calculation is in good agreement with values. Thus the motion coupling problem is solved, and high positioning accuracy is obtained.
微位移工作台,柔性铰链,二维,解耦,刚度,micro-displacement workable,flexure hinge,two-dimension,decoupling,stiffness。
二维解耦微位移工作台的设计和有限元分析。
- 1锅筒总图
- 2156723_土石方工程培训课件
- 314年全国监理工程师培训考试用书建设工程合同管理
- 4YS/T 861.3-2013 铌钛合金化学分析方法 第3部分:氢量的测定惰气熔融热导法
- 5切削用量手册
- 6GB/T 4975-2018 容积式压缩机术语 总则
- 7DB13/T 2741-2018 社区养老服务中心服务规范
- 8如何挑选水龙头
- 9GB-T11263-2005(热轧H钢)
- 10磁悬浮运动中电磁铁磁滞特性的非线性影响研究
- 11摩托车三维模型SolidWorks设计
- 12HJ 1047-2019 水质 锑的测定 石墨炉原子吸收分光光度法
- 13冷轧750平整机基础CAD图纸
- 14GB/T 33542-2017 多效蒸馏海水淡化装置通用技术要求
- 15广州路干河沿B C幢工程住宅楼的施工测量方案