基于UG的摇摆臂零件制造工艺设计
- 文件大小:1.41MB
- 浏览次数:
- 发布时间:2014-12-11
本资料包含pdf文件1个,下载需要1积分
在对摇摆臂零件加工工艺设计,以及对加工此零件的外圆弧台阶面所需专用夹具的设计中,采用UG软件对摇摆臂零件和夹具体进行了三维建模。该夹具的特点是:可以装夹两个工件同时加工,两个工件的圆弧台阶面合在一起变成了一个整圆,既能保证加工时的平衡,又能提高效率。同时验算与校核了夹具的精度,以保证其满足设计要求,并对加工零件的外圆弧台阶面进行了数控编程。
In the design of processing technology of the swing arm part and the special fixture required by the stepped surface of the outer are of this processed part, UG is used to build 3D modeling for the swing arm and its special fixture. The fixture has features that it can clamp and process two parts at the same time. The cireular stepped surfaces of two parts are glued into a full circle. It can guarantee the balance in the processing, and improve the efficiency. Meanwhile, the aceuracy is used for processing the fixture is calculated and checked, in order to ensure the design requirements. Then the NC programming of the outer circular stepped surface.
加工工艺,三维建模,夹具设计,精度分析,数控编程,process technology,three-dimensional modeling,fixture design,accuracy analysis,NC programming。
基于UG的摇摆臂零件制造工艺设计。
- 1齿轮公差及其选用PDF扫描版
- 2n-SiO2/BGF和PEi-BGF/SiO2两类复合磨粒及抛光液对硅的抛光性能影响
- 3钢筋冷拉机安全技术交底
- 4长治金泽生物工程有限公司煮炉方案
- 5[天津]交通枢纽地下空间装饰装修工程施工组织设计(投标)
- 6CB/T 4385-2015 船用舷灯座
- 7JB/T 7774.6-2008 银氧化锌电触头材料化学分析方法 第6部分:火粉原子吸收光谱法测定镉量
- 8岩土工程勘察与设计课件
- 92012年一级建造师《市政工程管理与实务》单选题练习四
- 10THOHI六轴机械手SolidWorks设计
- 11高强无收缩灌浆料抗浮锚杆施工工法
- 12交联蒸汽箱图纸
- 13计算基础配筋工具小软件
- 14霍顿HoldenEfijy概念跑车车壳模型3D图纸三维模型SolidWorks,ProE设计
- 15海狮stl格式