1.OMt/a乙烯裂解气压缩机驱动用汽轮机的设计特点和制造检验要点分析
- 文件大小:1.29MB
- 浏览次数:
- 发布时间:2014-09-14
本资料包含pdf文件1个,下载需要1积分
通过对裂解气压缩机驱动用汽轮机设计、制造、检验全过程的梳理,详细介绍了1.0Mt/a乙烯装置中裂解气压缩机驱动用汽轮机的性能参数及设计特点,并对其制造和检验中需要注意的关键要点进行了分析和阐述,并对试车时出现的反常现象和处置方法进行了简要分析和阐述。该汽轮机最终通过了空负荷试车检验,这反映了该汽轮机主体的机械性能符合API612标准要求。
Through the collation of design, fabrication and inspection of driving turbine used in cracking gas compressor in 1.0 Mt/a ethylene plant, the parameters and characteristics of this turbine were introduced in detail in this article. The key points in the fabrication and inspection as well as the abnormal phenomena appeared in test running were described and analyzed. This turbine was passed the test finally, and the mechanical characteristics of this turbine had been proved being qualified with API612 standard.
裂解气,工业汽轮机,制造,检验,振幅,cracking gas,industrial turbine,fabrication,inspection,amplitude。
1.OMt/a乙烯裂解气压缩机驱动用汽轮机的设计特点和制造检验要点分析。
- 1建筑基桩检测技术规范
- 2同心套管双程流相变蓄热单元蓄放热特性研究
- 3DB61/T 1001.1-2015 保健用品微生物限度检查 第1部分:总则
- 42013注册资产评估师机电设备评估基础考前练习(5)
- 5SY/T 6717-2016 油管和套管内涂层技术条件
- 6造球机图纸CAD图纸
- 7DB64/T 252-2002 无公害食品 枸杞生产技术规程
- 82013-2017年中国工业泵行业市场研究及发展前景预测报告
- 9储罐牺牲阳极保护施工方案
- 10YS/T 535.2-2006 氟化钠化学分析方法 蒸馏-硝酸钍容量法测定氟量(GB 8158.2-1987)
- 11gb 18593-2001 熔融结合环氧粉末涂料的防腐蚀涂装
- 12SY/T 5711-95 钻具螺纹电刷镀镀铜和磷化方法
- 13YY/T 0310-2015 X射线计算机体层摄影设备通用技术要求
- 14温泉花园北区21号楼外架施工方案
- 15JGJ156-2008 镇(乡)村文化中心建筑设计规范及条文说明