机械制造课程设计 设计端盖零件的机械加工工艺规程及工艺装备【全套文件】
- 文件大小:1MB
- 浏览次数:
- 发布时间:2017-03-10
本资料包含doc文件5个、dwg文件4个,下载需要100积分
机械制造课程设计 设计端盖零件的机械加工工艺规程及工艺装备全套文件
摘要
机械制造工艺学课程设计是我们学完了大学的全部基次、技术基次以及大部分专业课之后进行的.这是我们在进行毕业设计之前对所学各课程的-次深入的综合性的总复习,也是-次理论联系实际的训练,因此,它在我们四年的大学生活中占有重要的地位。
这次设计的是端盖,有零件图、毛坯图、装配图各-张,机械加工工艺过程卡片和与所设计夹具对应那道工序的工序卡片各-张。首先我们要熟悉零件,题目所给的零件是端盖。了解了端盖的作用,接下来根据零件的性质和零件图上各端面的粗糙度确定毛坯的尺寸和机械加工余量。然后我们再根据定位基准先确定精基准,后确定粗基准,最后拟定端盖的工艺路线图,制定该工件的夹紧方案,画出夹具装配图。
Abstract
Machinery Manufacturing Technology curriculum design is finished we learn all the basic course of the University, technology and the most basic course after the specialized, which is our graduation project before conducting the various courses of study by an in-depth comprehensive review of the total, is also a Theory with practical training, therefore, in our four years of university life occupy an important position.
This is the cover design, parts map, rough map, one of the assembly, machining process with the card and the corresponding fixture designed by the procedures of the process of a card. First of all, we must familiar with the parts, the parts subject to the cover. Cover understanding of the role, followed in accordance with the nature of parts and components in the face of the map on the roughness of rough determine the size and mechanical Jiagongyuliang. According to another location and then we set the benchmark fine first base, established after the benchmark crude, finalizing the cover of the road map, the enactment of the workpiece clamping programme, to draw fixture assembly.
目录
1、端盖的工艺分析及生产类型的确定 2
1.1、端盖的用途 2
1.2、端盖的技术要求 2
1.3、审查端盖的工艺性 2
1.4、确定端盖的生产类型 3
2、确定毛胚、绘制毛胚简图 3
2.1选择毛胚 3
2.2确定毛胚的尺寸公差和机械加工余量 3
2.2.1公差等级 3
2.2.2端盖铸造毛坯尺寸工差及加工余量 4
2.2.3绘制端盖毛坯简图 4
3、拟定端盖工艺路线 5
3.1、定位基准的选择 5
3.1.1.精基准的选择 5
3.2.2.粗基准的选择 5
3.2 、表面加工方法的确定 5
3.3、加工阶段的划分 6
3.4、工序的集中与分散 6
3.5、工序顺序的安排 6
3.5.1机械加工工序 6
3.5.2.热处理工序 7
3.5.3.辅助工序 7
3.6、确定工艺路线 7
4、加工余量、工序尺寸和工差的确定 8
5、切削用量、时间定额的计算 9
5.1、切削用量的计算 9
5.1.1钻孔工步 9
5.1.2 粗铰工步 10
5.1.3精铰工步 10
5.2、时间定额的计算 10
5.2.1.基本时间tj的计算 10
5.2.2.辅助时间ta的计算 11
5.2.3. 其他时间的计算 12
5.2.4.单件时间tdj的计算 12
6.夹具设计 13
6.1提出问题 13
6.2设计思想 14
6.3夹具设计 14
6.3.1定位分析 14
6.3.2切削力及夹紧力的计算 15
6.3.3夹具操作说明 17
6.3.4确定导向装置 17
7. 体会与展望 18
8.参考文献 19
- 1某高层建筑投标施工组织设计(范本)word文档
- 22007年一级《管理与实务(民航机场工程)》考试试卷及答案
- 3游客服务中心4层框架结构设计施工图纸cad
- 4螺旋输送机DN250
- 5机械工程师CAD2006企业版+++
- 62011年二级建造师(市政)实务问答100题
- 7某公路合同段测量施工方案
- 8广联达系列软件通杀,高手测试用
- 9通达信装潢预算软件 V9.7.29
- 10[2011]一级建造师考试建筑工程实务与管理模拟题3
- 11MSS SP-44-2010 钢制管道法兰 Steel Pipeline Flanges标准
- 12永磁同步发电系统非线性内模控制
- 13混凝土结构工程施工工艺砖混、外砖内模结构构造柱、圈梁、板缝钢筋绑扎工艺
- 14轻型井点降水工程施工工艺
- 15002框架结构定型组合钢模板的安装与拆除工艺