拉床工作模态参数分析
- 文件大小:329.79KB
- 浏览次数:
- 发布时间:2014-03-23
文件介绍:
本资料包含pdf文件1个,下载需要1积分
研究了LG51SH立式拉床工作模态参数,以考察拉床机械结构对其动态特性的影响。在拉床主要结构上布置测点,进行拉刀工作激励下的模态试验,利用LMS振动测试设备SCADAIII-105,获得实测的频响数据。采用多参考最小二乘复频域(PolyMAX)法,分析拉床工作模态参数。给出了模态识别稳态图,以及前10阶典型振型、模态阻尼比和固有频率等拉床工作模态参数。分析结果表明,LG51SH拉床整机模态中有38Hz、192Hz的固有频率,与6Hz的拉削力基频的整数倍很接近,应合理安排拉削速度,避免出现激励固有频率的拉削力基频。 Modal parameters for LG51SH broaching machine from operational responses is studied to examine the dynamic properties of mechanical structure.The operational modal is analyzed using PolyMAX method w ith responsive data of key point in broaching machine,w hich is excited in practical broaching operation and tested by LMS SCADAIII-105 system.The identified steady state modal、representative modal shape、modal damping ratio and natural frequency in broaching are presented.The test and analysis result show s that there are natural frequency of 38Hz and 192Hz,w hich are close to multiple of the fundamental frequency of cutting force in broaching,6Hz,therefore,reasonable cutting velocity should be adopted to void producing fundamental frequency of cutting force in broaching.
文件列表
正在加载...请等待或刷新页面...
发表评论
更多..相关推荐
更多..最近更新
- 1典型焊接图例(清晰版)
- 2YC/T 115-1996 烟草机械 YB11型卸盘机
- 3高层住宅施工工程设计总图
- 4DB32/T 2350-2013 连粳9 号栽培技术规程
- 5施工项目管理系列之施工项目管理组织
- 6GB/T 25678-2010 印刷机械 卷筒纸平版商业印刷机
- 7幼儿园建设标准
- 8新农村超漂亮户型图1
- 9JIS D 4010-1993 货车后横梁上机械连接装置的安装
- 10常用CAD图块-柜子类
- 11鸭业污水处理CAD图纸
- 12TB/T 3475.1-2017 机车、动车组用柴油机零部件 第1部分:曲轴
- 13消防管理制度、易燃易爆管理制度
- 14180度直插RJ45带灯
- 15店面转让合同