建立弹簧-质量-阻尼系统数学模型的数轴法
- 文件大小:281.8KB
- 浏览次数:
- 发布时间:2014-03-19
本资料包含pdf文件1个,下载需要1积分
提出一种建立弹簧?质量?阻尼系统其数学模型的简单方法――数轴建模法,即建立与系统平行方向的数轴,把弹簧或阻尼器的实际位移值当做有理数标在数轴上对应位置,然后按照有理数比较大小的结果确定相应质量块所受弹簧力或阻尼力的大小和方向,进而求得系统的微分方程。分别以单自由度系统、两自由度振动系统及多自由度系统为例,阐述了数轴法在建立机械振动系统的数学模型中的应用。结果表明此方法在列写弹簧?质量?阻尼系统的运动微分方程时非常有效。 A simple method called Numerical-Axis-Method for establishing the mathematical models of the common mass-spring-damper systems was put forward. In establishing the mathematical model, a numerical-axis parallel to the sys- tem was built, and the displacements of the spring or the damper were translated to the rational numbers which were marked on the numerical-axis. Then the magnitude and the direction of spring force or damping force applied to the corresponding mass was determined by comparing the two rational numbers mutually. The application of this method on establishing the mathematical models of mechanical vibration systems was expatiated through a single degree-of-freedom (DOF) system, a double DOF system and a multi-DOF system. The results show that this method was very efficient in establishing the kinematic differential eouations of the mass-snrine-damoer systems.
- 1全国一级注册建造师执业资格考试预测试卷 隧道工程
- 2GB4716-93
- 3广联达2011+++写狗写锁数据生成系统
- 401S305 小型潜水排污泵图集
- 5基于PLC的电动车轮毂制造方案改进
- 6建筑工程建筑装饰装修工程 (2)
- 7GB/T 20014.18-2008 良好农业规范 第18部分:水产滩涂、吊养、底播养殖基础控制点与符合性规范
- 8沥青路面设计和材料一体化综述
- 9碧云山庄几套别墅设计施工图
- 10防腐面积计算软件
- 11川港汽车城3#楼钢结构设计施工图
- 12SN/T 0782.2-1998 普遍优惠制原产地证明书报文
- 13风机房采暖平面图CAD图纸
- 14SY/T 0073-2012 管道防腐层补伤材料评价试验方法
- 155t桥式起重机起升机构的设计计算