PTFE编织复合材料摩擦特性研究
- 文件大小:1.14MB
- 浏览次数:
- 发布时间:2014-03-17
本资料包含pdf文件1个,下载需要1积分
The dry friction tests of PTFE braided composites were carried out on high-speed tribo-tes er with speed, load as variables. The influence of different speed, load on the friction coefficient were analyzed. The results show that friction coefficient is stable reducing trend and finally stabilized with increasing load. Friction coefficient with the speed of change trend is: between 10-20kN, with increasing of the frequency, friction coefficient gets a minimum value and then rises to a steady value. The influence of the load on the friction coefficient is greater than that of frequency on the friction coefficient. Through the analysis of the microstructure of the liner using scanning electron microscope, the influences mechanism of speed, load on the friction coefficient was explained.在高速摩擦磨损试验机上以摆动频率、载荷为变量对PTFE编织复合材料进行于摩擦性能测量实验,分析摆动频率、载荷对摩擦因数的影响规律。结果表明:材料的摩擦因数随载荷增大呈稳定降低趋势,最后趋于平稳。在20~40kN载荷范围内,摩擦因数随摆动频率的增大经过一个最小值后上升到稳定值。载荷对摩擦因数的影响大于频率的影响。通过扫描电子显微镜对不同载荷频率下产生的PTFE编织复合材料转移膜的分析,从微观上解释了摆动频率、载荷影响PTFE编织复合材料摩擦因数的作用机理。
- 1某四星级酒店图纸说明及材料做法表
- 2SH/T 0339-1992 NaY分子筛晶胞参数测定法
- 3ZL90装载机整体液压图
- 4北京市建筑工程清水混凝土施工技术规程
- 5一种基于非线性流形学习的故障特征提取模型
- 6新房验房步骤
- 7西皇小区高层住宅楼建筑设计施工图纸
- 8九澳油库施工组织设计
- 9过铁路超浅埋大跨暗挖隧道施工技术
- 10斯特林模型图纸-PDF和3d proe设计
- 11GA/T 536.4-2005 易燃易爆危险品 火灾危险性分级及试验方法 第4部分:遇水放出易燃气体物质分级试验
- 12金地网球馆桁架施工组织设计
- 13SH/T 0472-1992 合成航空润滑油中微量金属含量测定法(原子吸收法)
- 14JC/T 515-2001 单一玄武岩铸石制品
- 1517#、20#、23#、28#房屋补漏混凝土裂缝修补施工方案