多目标优化参数向单目标优化参数的转化研究
- 文件大小:195.71KB
- 浏览次数:
- 发布时间:2014-03-16
本资料包含pdf文件1个,下载需要1积分
The article takes the movement analysis of the whereabouts stage of the running wheel of a beater as an example,establishes multi-objective optimized models of dynamic parameters about the impact wheel. Linear weighted sum method, contained in the multi-objective optimized method, is used to make the multi-objective optimized problem into simple-objective optimized problem, and the effective solution is the optimal solution of the multi-objective optimization problem which is obtained by using the MATLAB software. Thus the dynamic capability of the impact wheel both on horizontal direction and vertical direction will be greatly improved.以夯实机冲击轮下落阶段进行运动分析为例,建立冲击轮动力参数的多目标优化模型,以水平速度变化率最小和垂直速度变化率最大为两追求目标.运用多目标优化方法中的线性加权和法对其进行优化处理,由多目标优化问题转化为单目标优化问题,运用MATLAB软件解得的最优解即为该多目标优化问题的有效解.使得优化后的冲击轮动力性能在水平方向和垂直方向上均有较大的改善.
- 1麦格米特MC系列小型可编程控制器编程手册
- 2水利水电造价软件
- 3某别墅全套结构施工图(09年12月新图)
- 4铣刀头总体总图
- 5某工程搅拌桩施工方案-secret
- 6浮钳盘式制动器结构三维图
- 7GB/T 3198-2010 铝及铝合金箔
- 8钢筋混凝土筒仓结构基础设计中旋喷桩复合地基的应用
- 9装甲坦克SolidWorks模型设计
- 10某地工业建筑煤仓立筒灰仓工程建筑施工图
- 11gbt 1966-1996多孔陶瓷显气孔率、容重试验方法
- 12零星工程委托管理操作实施细则
- 13SN/T 3480.1-2013 进出口电子电工工业成套设备检验技术要求 第1部分:印刷线路板表面贴装设备
- 14二株羽扇豆3dsmax设计
- 15GB/T16275-2008 城市轨道交通照明