起重机偏轨梁腹板局部压应力分布规律研究
- 文件大小:259.29KB
- 浏览次数:
- 发布时间:2014-03-15
文件介绍:
本资料包含pdf文件1个,下载需要1积分
Considering various factors regarding general or special tracks in different models mainly used for cranes and different load locations such as mid-span or end-span, the finite element method is used to get local stress distribution on the rail and web edges. Through secondary fitting, a calculation formula regarding the distribution law of local stress on web upper edges along the centerline direction is provided, which is compared with the formula given by crane design specification, providing referenced basis for the girder strength calculation.考虑起重机常用的通用或专用各种型号轨道和跨中或跨端不同承载位置等多种影响因素,采用有限元方法获得了轨道与腹板上边缘的局部应力分布情况。通过二次拟合,给出了腹板上边缘局部压应力在轨道中心线方向分布规律的计算公式,并与起重机设计规范的公式作了比较,为主梁强度计算提供了可参考的依据。
文件列表
正在加载...请等待或刷新页面...
发表评论
更多..相关推荐
更多..最近更新
- 1GB 5779.1-1986 紧固件表面缺陷 螺栓、螺钉和螺柱 一般要求
- 2山东省建设工程费用项目组成及计算规则
- 3石长铁路增建标段施工设计方案word文档
- 4HG 3095-1988 橡胶火焰试验术语
- 5山西煤苑15#楼住宅楼-框剪住宅楼施工组织设计
- 6隧道施工要点(三)
- 7BS EN 10029-2010 Hot-rolled steel plates 3mm thick or above — Tolerances on dimensions and shape
- 8性能可调的自润滑叠层复合材料的摩擦学行为研究
- 9钢结构别墅cad结构图
- 10运用QC确保铝木复合窗防渗漏一次成优
- 11筑物抗震构造详图(单层砌体房屋)
- 12金丰里3#库住宅室内装修工程施工方案
- 13沈阳箫雅服饰厂办公区装修设计施工图纸
- 14TB/T 3060-2016 机车信号信息定义及分配
- 15带控制点的木糖提取工艺示意CAD图