锐钛矿相TiO_2纳米纤维制备与摩擦学性能
- 文件大小:592.05KB
- 浏览次数:
- 发布时间:2014-03-14
本资料包含pdf文件1个,下载需要1积分
Anatase TiO2 nanofiber was prepared via an available alkaline hydrothermal method and surface modified. The obtained products were characterized by using X-ray diffraction (XRD), scanning electron microscope (SEM) measurements and Fourier transform infrared spectroscopy (FT-IR). The as-prepared TiO2 nanofiber could be well dispersed in liquid paraffin, and its tribological properties as additive were evaluated with a four-ball tester. The results showed that the as-prepared TiO2 nanofiber exhibited good performance in anti-wear and friction-reduction, load- carrying capacity, and extreme pressure properties. When addition amount of the as-prepared TiO2 nanofiber was 1.5% of mass fraction in liquid paraffin, the best anti-friction wear reducing and bearing capacity enhancing were obtained, which made the TiO2 nanofiber promising for green lubricating oil additives.采用简便且可重复性较好的碱熔法制备锐钛矿相TiO2,采用简便的表面修饰技术对其进行表面改性,得到TiO2纳米纤维,并采用XRD、SEM和FT-IR方法对其进行表征。利用四球摩擦试验机考察其作为油品润滑添加剂的摩擦学性能。结果表明,所合成的TiO2纳米纤维为锐钛矿相结构,结晶度和纯度较高,而且在油品中具有良好的分散性;TiO2纳米纤维具有良好的抗磨减摩性能,并能够很好地提高油品承载能力,当其加入量为1.5(质量分数)时,抗磨减摩以及提高承载能力的效果最好。这些特性使得锐钛矿相TiO2纳米纤维有望在未来成为绿色润滑油添加剂。
- 1电站阀门阀体密封面深孔堆焊工艺分析
- 2第5章 组合体 PPT课件
- 3JB/T 6292-1992 活塞式输油泵 安装型式及连接尺寸
- 4NB-T47002[1][1].1-4-2009 压力容器用爆炸焊接复合板
- 5机器人夹爪夹取零件ug动画视频教程,UG,NX设计
- 6CFG桩在温福铁路中的应用
- 7DB34/T 175-1998 后备母猪的饲养与管理
- 82012年注册安全工程师案例分析模考班1-2
- 9VE型分配泵--柴油机燃油泵,PROE设计三维模型ProE设计
- 10106.混凝土灌注桩挡土墙施工安全技术交底
- 11JA007-04《安全检查事项确认表》
- 12北京市轨道交通工程某站钢结构工程施工组织设计
- 13钢屋架安装施工吊装方案
- 14民用建筑设计通则
- 15A车型铁高顶驾驶室外观质量分析及工装改造