基于信号共振稀疏分解与重分配小波尺度谱的转子碰摩故障诊断方法
- 文件大小:502.79KB
- 浏览次数:
- 发布时间:2014-03-12
文件介绍:
本资料包含pdf文件1个,下载需要1积分
A method for rub-impact diagnosis of rotors based on resonance-based sparse signal decomposition and reassigned wavelet scalogram was proposed here.Differing from the tradition signal decomposition method based on frequency band,with the resonance-based sparse signal decomposition method a signal was decomposed into higher resonance components and lower resonance components according to their Q-factors.When a rub-impact occurred in a rotor system,the vibration signal was composed of periodic signals mainly containing rotor rotating frequency components and their harmonics,transient impulse signals with rotor fault information and noise.Periodic signals were a narrow band signal with a higher Q-factor,and could be decomposed into higher resonance components;while transient impulse signals were a wideband signal with a lower Q-factor,and could be decomposed into lower resonance components.With the proposed method,impulse components were extracted from a rub-impact signal of rotors using the resonance-based sparse signal decomposition,they were analyzed with the reassigned wavelet scalogram and the fault of rub-impact in a rotor system was diagnosed according to the periods of impulse components in the scalogram.Simulations and application examples showed that the proposed method is effective to diagnose rub-impact faults of rotor systems.提出了基于信号共振稀疏分解与重分配小波尺度谱的转子碰摩故障诊断方法。与常规的基于频带划分的信号分解方法不同,信号共振稀疏分解方法根据信号中各成分品质因子的不同,将信号分解成高共振分量和低共振分量。当转子出现碰摩故障时,振动信号往往由以转频及谐波为主要成分的周期信号、包含转子故障信息的瞬态冲击信号以及噪声组成。周期信号为窄带信号,具有高的品质因子,可分解为高共振分量;而瞬态冲击信号为宽带信号,具有低的品质因子,可分解为低共振分量。本文方法先利用信号共振稀疏分解方法从转子碰摩信号中提取冲击成分,再对提取的冲击成分进行重分配小波尺度谱分析,最后根据尺度图中冲击成分的周期诊断转子碰摩故障。算法仿真和应用实例验证了该方法诊断转子碰摩故障的有效性。
文件列表
正在加载...请等待或刷新页面...
发表评论
更多..相关推荐
更多..最近更新
- 1Midas Building2011楼梯、网架、性能设计、强柱弱梁验算详细操作流程
- 2山西机器制造厂建北综合楼施工组织设计
- 3岛上度假区C座别墅设计施工图
- 4广东电网公司配网安健环设施标准
- 5建筑工程施工现场安全控制专项方案
- 6金思路盖梁计算程序+++版
- 7京沪高速铁路虹桥动车所大面积真空预压施工工艺总结
- 8水木兰亭公寓住宅装修施工图纸
- 9CFL10/0.8低温绝热液体储罐图纸
- 10齿轮
- 11DB13/1452-2011 合成氨单位产品能源消耗限额
- 122011监理工程师考试案例与解析
- 13GB/T 35605-2017 绿色产品评价 墙体材料
- 14YY 0770.2-2009 医用输、注器具用过滤材料 第2部分:空气过滤材料
- 15YSQ-3液化石油气瓶阀 液化石油气瓶阀CAD图纸