液压缸用高强钢焊接接头性能及组织研究
- 文件大小:509.52KB
- 浏览次数:
- 发布时间:2014-03-10
文件介绍:
本资料包含pdf文件1个,下载需要1积分
The welding butt joint performance of the high strength steel used in hydraulic cylinder was re- searched. The result shows that: with small heat input and 600 MPa grade weld metarial, the results of the tensile strength, impact value and cold bending property are good. Although the carbon equivalent of 20MnTiB is lower than that of 45# ,20MnTiB is more inclined to harden, and in HAZ, most of the struc- tures is the lower carbon martensite. With proper heat input ,20MnTiB can be used in manufacturing of the hydraulic cylinder.研究了液压油缸用高强钢采用小热输入情况下,600MPa级焊材焊接的对接接头组织和性能。结果表明:焊接对接接头的拉伸强度、冲击性能和冷弯性能优良,Ceq(20MnTiB)〈Ceq(45),但20MnTiB淬硬倾向更大。高强钢焊接热影响区粗晶区组织较母材组织有所粗化,以低碳马氏体为主。当控制合理的热输入时,完全可以用于液压油缸的制造。
文件列表
正在加载...请等待或刷新页面...
发表评论
更多..相关推荐
更多..最近更新
- 1135kV及以下架空电力线路施工及验收规范GB50173
- 2某高层建筑水电安装工程施工组织设计
- 3DB3302/T 103-2010 锦鲤培育技术规范
- 4搬运机械手仿真设计和制作_王建军
- 5GB/T 22111-2008 地理标志产品 普洱茶
- 6DB14/T 752-2013 胡萝卜白粉病严重度分级及调查方法
- 7cjj 68-2007 城镇排水管渠与泵站维护技术规程
- 8减速机零件图与装配图与变速箱装配图
- 9某园桥汀步景观设计CAD图纸(版本12)
- 10装修图库大全图纸
- 11基于PLC控制的气动机械手的设计与实现
- 12安费诺500极耳ug/nx设计
- 13HGT_21543-2009_圆形塔平台通用图
- 14兰新线至盐湖段提速改造工程施工设计方案word文档
- 15汉服 衣服SolidWorks设计