螺栓联接梁结构结合部非线性特性参数辨识
- 文件大小:441.79KB
- 浏览次数:
- 发布时间:2014-03-10
本资料包含pdf文件1个,下载需要1积分
Between two contact surfaces of bolt connection, there exist the friction, slip and slap for the interfacial gaps. So the dynamical behavior of the bolted built-up structure usually shows the nonlinear characteristics. Estimating the non-linear dy- namical characteristic parameters of bolt joint is very important to create the complex dynamics model considered the joint char- acteristics. In the paper, the bolted beam structure is taken as an example and the method for identifying nonlinear characteris- tic parameters for bolt joint is sytematically studied. On the basis of analyzing the non-linear model of bolt joint and measuring its characteristics the simplified Iwan model is adopted to simulate the joint characteristics and the analytical model of bolt build-up structure is set up. Furthermore, the force-state mapping method is chosen to identify the bolt joint parameters and the corresponding test procedures are presented too. At last as a practical study case the non-linear stiffness and damping pa- rameters of bolt joint are identified by the proposed method which can be used as the reference for identifying the non-linear joint parameters of the other bolt build-up structures.以螺栓联接组合梁为例,系统地研究了辨识结合部非线性特性参数的方法。在分析结合部非线性模型以及对非线性结合部动力学特性表征测试的基础上,提出采用简化的1wan模型模拟结合面之间的非线性动力学现象,从而建立了螺栓联接组合梁非线性解析模型。进一步,提出采用力状态映射法(Force―statemapping)识别螺栓组合梁结合部动力学特性参数的方法及相应的测试流程。最后,进行了实例研究,应用所提出的方法,辨识出了所研究的螺栓组合梁结合部的刚度及阻尼特性参数。该研究可作为辨识其他螺栓联接结合部动力学特性参数的参考。
- 1岩棉外墙外保温工程施工
- 2高层层住宅楼建筑平立面图
- 3超豪华的欧式施工图附实景照片原创
- 4水立方83#楼0515-建筑图
- 5橄榄收获机SolidWorks设计
- 6机械车库受力图
- 7GB 29226-2012 食品添加剂 天门冬氨酸钙
- 8GB/T 33598.2-2020 车用动力电池回收利用 再生利用 第2部分:材料回收要求
- 9《二氧化碳灭火系统设计规范》GB 50193-93
- 10公路隧道建设安全风险评估指南(试用本) 2009.02.09
- 11万向轴inventor设计
- 12注册岩土基础考试经典试题汇总_secret
- 13GB/T 5777-2019 无缝和焊接(埋弧焊除外)钢管纵向和/或横向缺欠的全圆周自动超声检测
- 14卧式阻挡器SolidWorks设计
- 15高速铁路路基技术