芳纶纤维对环氧树脂固体润滑涂层性能的影响
- 文件大小:911.82KB
- 浏览次数:
- 发布时间:2014-03-09
本资料包含pdf文件1个,下载需要1积分
The bonded solid lubricant coating containing aramid fibers was prepared by spraying process. The tribotests of the material was conducted by using the HDM-20 tribometer under dry lubrication conditions. The results show that, under dry friction condition, the coating with aramid fiber is benefit for the form of free lubrication coating, and the existing of aramid could enhance the carrying capacity, so the aramid coating shows a good performance of friction reducing and antiadhesion. When the mass ratio between aramid fibers and epoxy resin E54 is 0. 02 - 0. 03 at constant load, the aramid coating has the best performance of friction reducing and anti-adhesion.采用喷涂工艺制备含有芳纶纤维的环氧树脂黏结固体润滑涂层材料,并在HDM-20断面摩擦磨损试验机上进行干摩擦条件下的摩擦磨损试验。结果表明:干摩擦条件下,含芳纶纤维的环氧树脂涂层有利于涂层中含有的自润滑组元石墨、二硫化钼的挤出,在摩擦副的接触表面形成转移膜,从而使涂层体现出较好的减摩、抗黏着性能;与黏结组元环氧树脂E54的质量比为0.02―0.03的芳纶纤维涂层具有较好的减摩、抗黏着性能。
- 1车床主轴箱CAD装配图(全部CAD格式图纸)
- 2SY/T 5588-2012 注水井调剖工艺及效果评价
- 3直线一级倒立摆系统的PID控制策略研究毕业设计说明书 PDF扫描
- 4混沌吞噬者神剑ug/nx设计
- 5关于加强水利工程建设项目开工管理工作的通知
- 6TB 10420-2003 铁路电力工程施工质量验收标准
- 7DB51/T 516-2005 牛冷冻精液人工授精技术操作规程
- 8FMVSS 219 Standard No. 219; Windshield zone intrusion
- 9DL/T 5413-2009 水力发电厂测量装置配置设计规范
- 10PLC电梯控制毕业设计
- 11自动喷洒用消防泵一用一备控制电路图
- 122012建筑工程实物试题
- 13公路勘测设计pdf
- 14武夷山酒店宴会厅装修设计施工图
- 15强度严密性试验记录