立式加工中心机床的电器设计
- 文件大小:2.84MB
- 浏览次数:
- 发布时间:2013-04-11
本资料包含pdf文件1个,下载需要20积分
立式加工中心机床的电器设计The vertical machining
center is a kind of CNC machine tool with
magazine,which
can
change
tools
automatically
and
perform multi-working procedure.After
one
set-up,the
CNC
system
will control the machine to select or
change tools,change
the
spindle speed
and feed
rate.It also control relative movement between tool and
workpiece.Multiworking procedure
machining
on several faces of the
workpiece
can be achieved.The
development
of this kind
of machine has an immeasurable effect on
manufacturing industryS development
in Chian.
Excellent design of electrical
principles
and servo motor
matching
will not
only optimize
machine
performance,improve processing efficiency
but also
play
an
important
role in
securing
machine
safety
and
operatorS
life.
The author was in
charge
of the
design
for VDL800E-vertical
machining
center.The
designs
of servo motor
selection,electrical logic drawing
and electrical
principle drawing
are
based on machine
parameters
and CE certification
requirements
listed in BS-ENl24172001.
This
paper
has broad
application
on the
development
of CNC machine tools,through
the
description
of the
requirements
and the
analyzing
of the movement of the vertical
machining
center VDL-800E.Make a
general study
of the
torque,inertia
servo motor match
a.Then,analysed the CE certification of the
safety
standards and based on the
safety
standards make the
design
of electrical
logic drawing,and design
of electrical
principles
drawing
Key
Words:Vertical
Machining Center;Servo Motor Match;CE Certification;Electrical
Logic Design;Electrical Principles Plans;
独创性说明
作者郑重声明:本硕士学位论文是我个人在导师指导下进行的研究工
作及取得研究成果。尽我所知,除了文中特别加以标注和致谢的地方外,
论文中不包含其他人已经发表或撰写的研究成果,也不包含为获得大连理
.Y-大学或者其他单位的学位或证书所使用过的材料。与我-同工作的同志
对本研究所做的贡献均已在论文中做了明确的说明并表示了谢意。
- 1SN/T 0573-2010 进口可用作肥料原料的骨废料检验检疫规程
- 2液压缸设计-毕业设计
- 3液压技术在提升装置中的应用
- 4彩钢板房基础图
- 5雾化喷泉做法及柱阵基础设计cad图纸
- 6花园居住小区工程商务标
- 7四层框架办公楼结构设计施工图
- 8GB/T 11260-2008 圆钢涡流探伤方法
- 9山东某县污水处理厂施工组织设计
- 10JJG 686-2006 热水表检定规程
- 112011二级建造师 管理 冲刺班 第5讲 2Z102000(二)(2011年新版)
- 12GB/T 22331-2008 水产品中多氯联苯残留量的测定 气相色谱法
- 13橱柜实木系列结构CAD图库
- 14JB/T 9740.4-1999 低速风力机 安装规范
- 15GB/T 36195-2018 畜禽粪便无害化处理技术规范