压缩机设计说明书
- 文件大小:1.58MB
- 浏览次数:
- 发布时间:2013-02-26
本资料包含doc文件1个,下载需要20积分
压缩机设计说明书Abstract: Reciprocating compressor is a common type machine, used in the industry .V- type of piston compressors is a kind of reciprocating compressor, belong to the compressor , utilize the pistons in the cylinder moving to squeeze on the gas ,squeezed the gas pressure.
Thermal calculation and dynamical computation is basic of compressor design calculation, is also an important woke, according to medium, displacement, pressure of task-book, by calculating getting related parameters of compressors, such as levels, columns, size of cylinder, shaft power, by dynamical computation getting stressed status of a piston type compression, due to reduce the vibration is very important. heat calculation and dynamical computation of the piston type compressor, which is providing design data. The calculations reflect exactly the design level of the compressor.
Researching works is in order to the compressor have better mechanical properties, improve the efficiency and reduce energy consumption, prolong the machine the useful life. Through dynamical computation correction the size of crew, members, to improve the technical failure of the compressor, As shooting of low displacement, the cylinder, the piston, piston ring severity serious abrasion, so that increasing the related clearance, leakage rate, influence the displacement. Due to some problem of not normal noise improve. Eventually, work out this paragraph of a V-6 /10 reciprocating air compressor required to satisfy users, small volume, efficiency and long usage life.
Keywords: piston compressor; thermal calculation; dynamical computation; cylinder; crankshaft
目 录
摘要•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••Ⅰ
目录•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••Ⅲ
1 引言••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••1
1.1 压缩机设计的意义•••••••••••••••••••••••••••••••••••••••••••••••••••••••1
1.2 活塞压缩机的工作原理•••••••••••••••••••••••••••••••••••••••••••••••••••1
1.3 活塞压缩机的分类•••••••••••••••••••••••••••••••••••••••••••••••••••••••1
1.4 压缩机的发展前景•••••••••••••••••••••••••••••••••••••••••••••••••••••••1
1.5 压缩机设计说明•••••••••••••••••••••••••••••••••••••••••••••••••••••••••2
2 总体设计••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••4
2.1 总体设计原则•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••4
2.2 结构方案的选择•••••••••••••••••••••••••••••••••••••••••••••••••••••••••4
2.2.1 气缸排列型式的选择•••••••••••••••••••••••••••••••••••••••••••••••••••4
2.2.2 运动机构的结构及选择•••••••••••••••••••••••••••••••••••••••••••••••••5
2.2.3 级数选择和各级压力比的分配•••••••••••••••••••••••••••••••••••••••••••5
2.2.4 转速和行程的确定•••••••••••••••••••••••••••••••••••••••••••••••••••••6
3 热力计算••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••7
3.1 确定各级的容积效率•••••••••••••••••••••••••••••••••••••••••••••••••••••7
3.1.1 确定各级的容积系数•••••••••••••••••••••••••••••••••••••••••••••••••••7
3.1.2 选取压力系数•••••••••••••••••••••••••••••••••••••••••••••••••••••••••7
3.1.3 选取温度系数•••••••••••••••••••••••••••••••••••••••••••••••••••••••••7
3.1.4 泄漏系数•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••7
3.2 确定析水系数•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••7
3.3 各级的行程容积•••••••••••••••••••••••••••••••••••••••••••••••••••••••••8
3.4 气缸直径的确定•••••••••••••••••••••••••••••••••••••••••••••••••••••••••8
3.5 各级名义压缩比•••••••••••••••••••••••••••••••••••••••••••••••••••••••••9
3.6 新的容积系数•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••9
- 1自行车手柄inventor设计
- 2屋面工程技术规范 GB50345 部分修订内容解读
- 3DB33/748.3-2009 北冬虫夏草栽培技术规程 第3部分 质量安全要求
- 4某2×150MW电站项目主厂房钢结构制作、安装工程投标文件
- 5北京轻轨13标段施工方案
- 6某住宅楼桩基础设计 计算书
- 7GB 18406.3-2001 农产品安全质量 无公害畜禽肉产品安全要求
- 8滑动轴承设计
- 9土方平整施工方案
- 10城市桥梁工程施工与质量验收检验批
- 11水电安装工程内业资料
- 122012年 一级建造师 经济考前突破强化试卷三
- 13滑动离合器step/stp格式
- 1420米长宽800皮带机
- 152012河南省造价员考试例题03